What the calculator does
It tells you how many tiles to buy for a floor or wall, and how many boxes that is. Measure the length and width of the area, then enter the tile size from the box.
If you want the grout gap counted, put it in too. Leave it blank and the tiles are treated as touching. You can switch between metric and imperial at the top.
How the number is worked out
Divide the area by the area of one tile, then add the extra for cuts and breakages and round up.
tiles = area ÷ tile area × (1 + extra ÷ 100)
For a floor 3 m × 4 m, tiled with 60 × 30 cm tiles and 10% extra:
- 3 × 4 = 12 m² of floor
- 0.6 × 0.3 = 0.18 m² per tile
- 12 ÷ 0.18 = 66.7 tiles
- 66.7 + 10% = 73.3, so 74 tiles
With 8 tiles to a box, that is 10 boxes, or 80 tiles.
How much extra to allow
10% is enough for a straight layout, and 15% for diagonal or herringbone, because more tiles get cut at the edges. Allow more again for a small room with lots of cuts.
Buy all the tiles from one batch, and keep a few spare for repairs. Colours and sizes can vary slightly from batch to batch, and the tile you need in five years may no longer be made.
Grout gaps
A grout gap makes each tile take up slightly more room, so you need a few fewer. With a 3 mm gap, each tile in the example above covers 603 × 303 mm instead of 600 × 300 mm.
On large tiles it makes little difference, and on small mosaic tiles it matters more.
Awkward shapes
Split an L-shaped room into rectangles, work out each one and add the tiles together. Take off anything fixed, such as a bath or kitchen units, if you will not be tiling under it.
A tile larger than the area still needs at least one tile, and the calculator will say so rather than showing zero.