Speed, distance and time calculator

Speed, distance and time calculator

Time

How to use the calculator

Pick which of the three you want to find, fill in the other two and the answer appears straight away. Speed, distance and time are tied together by one triangle, so knowing any two gives you the third.

Choose your units from the drop-downs – miles, kilometres, metres or nautical miles for distance, and mph, km/h, m/s or knots for speed. Time goes in as hours, minutes and seconds, and any box you leave blank counts as zero.

The answer also comes back in the other common units, so a speed in mph is shown in km/h, m/s and knots too.

The formulas

speed = distance ÷ time

distance = speed × time

time = distance ÷ speed

The units have to agree before you divide. Speed in km/h goes with distance in km and time in hours, and mixing km with mph gives nonsense. The calculator converts everything to metres and seconds behind the scenes, which is why it can mix units freely.

Worked examples

Time: a 180 mile drive at 60 mph takes 180 ÷ 60 = 3 hours.

Speed: a marathon of 42.195 km in 3 h 30 min is 42.195 ÷ 3.5 = 12.06 km/h, which is a pace of about 5 min/km.

Distance: 2 hours at 110 km/h covers 110 × 2 = 220 km.

Runners tend to think in pace rather than speed. Pace is the inverse, minutes per kilometre or per mile instead of distance per hour, and the calculator shows it for speeds between 1 and 30 km/h.

Converting between speed units

To turn km/h into m/s, divide by 3.6. So 100 km/h is 27.8 m/s, and going the other way you multiply by 3.6.

One mph is 1.609 km/h, so the usual shortcut of multiplying mph by 1.6 is close enough for road signs. There is a full km/h to mph converter if you want more decimals.

A knot is one nautical mile per hour, which makes it 1.852 km/h exactly – handy, because a nautical mile is 1,852 metres.

Unitkm/hm/s
1 mph1.6090.447
1 knot1.8520.514
1 m/s3.61

The time trap and other gotchas

1 hour 30 minutes is 1.5 hours, not 1.3. Minutes are out of 60, so turn them into a fraction of an hour before you divide.

Take 90 km in 1 h 30 min. The right sum is 90 ÷ 1.5 = 60 km/h, whereas typing 1.3 gives 69.2 km/h, which is about 15% too fast.

The answer is an average over the whole journey, so it includes any stops you counted in the time. For a drive, that means the calculator's journey time is a floor: traffic, fuel stops and queues all add to it.

And it assumes a steady speed. A trip with a fast motorway stretch and a slow town section averages out, but the average tells you nothing about either part.

Metric Conversion Table iPhone and Android app Temperature Weight Length Area Volume Speed Time Angle Pressure Energy and Power Health and wellbeing Calculators