Inches to Yards

/
Bookmark Page Yards to Inches (Swap Units)

Format
Accuracy

Note: Fractional results are rounded to the nearest 1/64. For a more accurate answer please select 'decimal' from the options above the result.

Note: You can increase or decrease the accuracy of this answer by selecting the number of significant figures required from the options above the result.

Note: For a pure decimal result please select 'decimal' from the options above the result.

Show formula
yd =
in * 0.027778
 
 
 
Show working
Show result in exponential format
More information: Inches
Inches to Yards table - Click here for table options
Inches Yards
0in 0.00yd
1in 0.03yd
2in 0.06yd
3in 0.08yd
4in 0.11yd
5in 0.14yd
6in 0.17yd
7in 0.19yd
8in 0.22yd
9in 0.25yd
10in 0.28yd
11in 0.31yd
12in 0.33yd
13in 0.36yd
14in 0.39yd
15in 0.42yd
16in 0.44yd
17in 0.47yd
18in 0.50yd
19in 0.53yd
Inches Yards
20in 0.56yd
21in 0.58yd
22in 0.61yd
23in 0.64yd
24in 0.67yd
25in 0.69yd
26in 0.72yd
27in 0.75yd
28in 0.78yd
29in 0.81yd
30in 0.83yd
31in 0.86yd
32in 0.89yd
33in 0.92yd
34in 0.94yd
35in 0.97yd
36in 1.00yd
37in 1.03yd
38in 1.06yd
39in 1.08yd
Inches Yards
40in 1.11yd
41in 1.14yd
42in 1.17yd
43in 1.19yd
44in 1.22yd
45in 1.25yd
46in 1.28yd
47in 1.31yd
48in 1.33yd
49in 1.36yd
50in 1.39yd
51in 1.42yd
52in 1.44yd
53in 1.47yd
54in 1.50yd
55in 1.53yd
56in 1.56yd
57in 1.58yd
58in 1.61yd
59in 1.64yd
Start
Increments
Accuracy
Format
Print table
< Smaller Values Larger Values >

Inches

Use of the inch can be traced back as far as the 7th century. The first explicit definition we could find of its length was after 1066 when it was defined as the length of three barleycorns. This was not a satisfactory reference as barleycorn lengths vary naturally. The British Standards Institute defined the inch as 25.4mm in 1930 in the document "Metric Units in Engineering: Going SI". In March 1932 the American Standards Association were asked to rule on whether to adopt the same value (at the time the American inch was 1/.03937 mm which approximated to 25.400051 mm). Because the values were so close, and because Britain has already settled on that value, the ASA adopted this value on March 13, 1933.

yd =
in * 0.027778
 
 
 

Yards

A unit of length equal to 3 feet; defined as 91.44 centimeters; originally taken to be the average length of a stride

Metric Conversion Table iPhone & Android app Length Currency Temperature Weight Area Volume Speed Time Angle Pressure Energy and Power Health and Wellbeing